We are here to meet all your PDR needs here in Texarkana. Let’s answer a few questions you may have:
What is PDR?
PDR, or Paintless Dent Removal, is a procedure in which a technician removes dents, dings, and creases from a body panel by gently massaging the damaged area back into its original shape. This process requires specialized tools and training and should be left to certified individuals.
Is PDR covered by my insurance?
Absolutely! In fact, this method is often the preferred repair route for dents, dings, and creases in most cases.
What are some of the benefits of PDR?
There are many benefits to PDR, but by far, the greatest benefits are its low cost and quick repair turnaround. Because PDR is not as invasive as traditional repairs, it’s cheaper to do it; most repairs will cost you less than your insurance deductible. Likewise, it’s much faster to do, with most repairs taking a couple of hours to complete.
Does PDR damage the paint on my car?
NO! PDR is the only method of repairing dents on your car without damaging the factory paint on your vehicle.
Can you perform PDR on aluminum body panels?
Absolutely! Although PDR on aluminum requires more skill and further specialized tools, a good PDR technician will perform repairs on aluminum panels without any problem.
How do I find a good quality PDR technician in my area?
One way is to look for a NAPDRT member technician. NAPDRT is a not-for-profit organization that is at the forefront of setting nationally accepted standards for our industry. NAPDRT technicians agree to a set of standards and are bound by a CSI (Consumer Satisfaction Index ). In addition, many NAPDRT members are Vale National Certified. This is the only nationally recognized independent certification available to PDR technicians.
Can all dents be fixed?
No. The most important factors in determining whether or not PDR can repair a dent are depth and location. Dents the size of a dinner plate or larger can be fixed successfully as long as they are not too deep. On the other hand, some dents that are as small as a dime but very deep cannot be fixed using PDR because the metal is too stretched. Cracked paint can also be an indication that a dent is too deep. The best case is not to assume yes or no, and swing by for an estimate.
The most common dents fixed are the size of a golf ball and under. Most (about 95%) minor dents can be repaired. About 5% of minor dents can’t be fixed due to depth or location. Areas such as some quarter panel opening lips, some forward areas of heavily braced hoods, or the very edges of some panels are examples of bad locations.
If you have questions we didn’t answer here, door dings, dents, creases, or damage to your vehicle, please reach out to us at the shop. We would love to help clear anything up and understand how you want to proceed with your car’s repair. We are here to make your repair easy, seamless, and we are here to help. We want to get you back on the road with a car restored to its factory condition. Please give us a call or stop by the shop to estimate the damage. We want to explain the dent removal process to make things seamless and easy and get you back on the road and cruising. Call Us Today at 903-280-8190 or fill out our contact form here!
Well, you’ve done it. You managed to put a dent in your vehicle. Not just any dent though, it’s a crease.
You may think you are done for. After all, that will certainly require an extensive repair at the body shop where they might have to replace the whole door shell…right?
That’s what you may think! But the reality is, most minor creases can be removed using PDR!
PDR, or Paintless Dent Repair, is a minimally invasive procedure in which a technician removes dents, dings, and (like in our case) creases using specialized tools and techniques.
Unlike traditional repair, PDR does not require paint fillers (aka Bondo) to fix the damaged areas. It also doesn’t require extensive paintwork and blending afterward.
The process is fairly quick and inexpensive, with many repairs costing less than your insurance deductible and taking just a few hours to repair!
When it comes to creases, you really want to pick an experienced PDR technician to repair them. Crease dents can be tricky; It takes a Master PDR Technician with many years of experience a lot of time and effort to perfectly repair a sharp crease dent, especially in high metallic colors. It takes a lot of patience, cross-checking, and a pair of good eyes to see the small tiny lines and imperfections in a crease and to get your car back to pre-accident condition.
You must take your vehicle to someone that’s certified to perform the repair.
If you take it to an inexperienced technician, you run the risk of the repair being done wrong, and that’s never good. A bad PDR job can permanently damage the body panel the procedure was performed on, leaving you needing expensive traditional body repair to correct the issue; you may even need a whole new body panel!
As long as you have the right person for the job, you can expect the appearance of your vehicle to return to normal after the procedure, all without breaking the bank. Paintless Dent Removal is usually a lot less costly than a traditional body shop repair.
So don’t worry too much. As long as the crease is not very deep, the damage can be repaired with PDR, and you’ll be back up and running in your ride in no time.
If you have questions about the hail damage process, door dings, dents, creases, or damage to your vehicle, please reach out to us at the shop. We would love to help clear anything up and understand how you want to proceed with your car’s repair. We are here to make your repair easy, seamless, and we are here to help. We want to get you back on the road with a car restored to its factory condition. Please give us a call or stop by the shop to estimate the damage. We want to explain the dent removal process to make things seamless and easy and get you back on the road and cruising. Call Us Today at 903-280-8190 or fill out our contact form here!
Need to repair those dings and dents? PDR is the best option for Texarkana door ding repair. It can remove dents and dings at a fraction of the cost of traditional body repairs.
Why Paintless Dent Repair Is Effective
By using paintless dent repair, the original paint finish of your car will be preserved. In most cases, Texarkana door ding repair can only take a few hours. At Preferred Paintless Dent Removal, we have highly skilled technicians who are well experienced in PDR. Most of our clients are surprised at our capacity of restoring the value and appearance of their car in just a short period of time.
How Paintless Dent Repair Works
PDR is a unique technique used for Texarkana door ding repair. Our PDR technicians will use special tools in removing dents and dings from vehicles. However, PDR can only be effective if the paint on your car has not been cracked or damaged. The tech will carefully massage the dents or dings from the inside so the repair will be unnoticeable. We do not use body fillers or painting in order to protect the original finish of your vehicle.
What Causes Dents In Vehicles
One of the major causes of Texarkana door ding repair is mother nature. Sometimes severe storms can occur anytime. If you are not prepared for it, then most likely, it can result in numerous dents and dings on your car. You should not park your vehicle too closely in a parking lot in order to avoid bumping into car doors. Misplaced shopping carts can often result in dents and dings once they bump into your car. Bouncing balls are another common cause for Texarkana door ding repair.
We can help you with your Texarkana door ding repair. For a free estimate, just call (903) 280-8190. Our expert technicians can remove dents and dings as long as the paint is not cracked or damaged.